Daily Usage Report for AI Deerwood Village for 10/17/2026

Current Summary Info:29-day Summary Info:
Total number of residents: 31Total number of residents: 31
Total Usage: 2,450Total Usage: 64,560
Average Usage per Resident: 79Average Usage per Resident per Day: 72
  
Last read date as of this report: 10/17/2026Last read date as of this summary: 09/18/2026
Current read date as of this report: 10/18/2026Current read date as of this summary: 10/18/2026
Average number of days this report covers: 1.079 (Min: 1.000, Max: 3.344)Average number of days this summary covers: 29 (Min: 2, Max: 31)

Average Signal Strength: 738

Meter Not Advancing

These meters haven't registered any usage in a while, which may mean that either the lot is unoccupied, the residents have moved out temporarily, or the meter chamber is stuck with sand or rust. For Cereniti equipped systems, this could also mean the radio is disconnected from the meter.

Acct #Tx IDCurrent
Read
30-Day
Old Read
30-Day
Usage
30 Day
Average
Current
Read
Previous
Read
Usage
7727848237060370600037060370600

Total: 1 out of 31 (3.23%)

Reads Not Marked as OK

The status on the read is marked as not being "OK"; a status is returned for the Master Meter-brand and Metron brand systems only. If a meter is marked as "Leak", it means that water has been running through the meter continuously for at least 24 hours. The "Leak" status is reset 3 hours after a leak is fixed.

Acct #Tx IDCurrent
Read
30-Day
Old Read
30-Day
Usage
30 Day
Average
Current
Read
Previous
Read
UsageRead StatusDays Since Last
OK Status
Last Status
OK Date
4572784731206801169503,730124120680120570110Leak910/09/2026

Total: 1 out of 31 (3.23%)

High Users of Water

A resident is considered a high user if their 1-day usage is 250% higher than their per-day 30-day average and their 1-day usage is more than 100 gallons, or their 1-day usage is 300 gallons or more.

Acct #Tx IDCurrent
Read
30-Day
Old Read
30-Day
Usage
30 Day
Average
Current
Read
Previous
Read
UsagePercent Of
Total Usage
14728353099400966502,75092994009910030012.24%
267413328748406059014,250475748407429055022.45%

Total: 2 out of 31 (6.45%)
Total usage: 850 out of 2,450 (34.69%)

No Transmissions Received In A While

If a transponder has not transmitted a reading for more than 3 days, then the read shows up here. It is recommeded that you check the transmitter to make sure it is not lying on the ground, broken, missing, or water-logged.

Acct #Tx IDCurrent
Read
30-Day
Old Read
30-Day
Usage
30 Day
Average
Current
Read
Previous
Read
UsageDate Of
Last Read
35742404210100 (2 days)010100 (last read 59 days ago)08/20/2026

Total: 1 out of 31 (3.23%)

Usage Report

Acct #Tx IDCurrent
Read
30-Day
Old Read
30-Day
Usage
30 Day
Average
Current
Read
Previous
Read
Usage
1727820269710667602,95098697106969020
6727849185020839101,11037850208498040
7727848237060370600037060370600
872784762381102359402,17072238110238010100
972784746852067790730 (31 days)24685206846060 (last read 2 days ago)
1072784752903702861804,190140290370290100270
12735256681540784503,090103815408148060
14728353099400966502,750929940099100300
18740289331060250831028030
2072784811739201723201,600531739201739200
217278486648406444040013648406483010
2272784802283102256702,64088228310228200110
237278489639706305092031639706393040
247278483933409239095032933409332020
2572784841530301519501,0803615303015299040
267413328748406059014,2504757484074290550
2972784781515001501501,3504515150015145050
3072784721739401717402,2007317394017388060
3172835332422702418504201424227024226010
3272835451313301287202,6108713133013126070
35742404210100 (2 days)010100 (last read 59 days ago)
3672784701406201386202,0006714062014053090
37727847993470923801,09036934709341060
3974133271133301102503,08010311333011325080
417391704211402047067022211402113010
4272784711642801623001,9806616428016422060
43731736372060710401,02034720607200060
4472784771124701110801,3904611247011244030
4572784731206801169503,730124120680120570110
46727848594000921701,83061940009394060
4772784871166901145802,1107011669011664050

NOTE: The tooltip rendering is done using the truly amazing BoxOver, which can be found at http://boxover.swazz.org/