Daily Usage Report for Leesons MHC LLC for 03/31/2025

Filter (ignore case, find anywhere): (search terms separated with "|" will find multiple things)

Average Signal Strength: 894

These meters are reporting water flow into the facility.

Total: 4 out of 61 (6.56%)
Total 1-day pumpage: 1,870
Total 30-day pumpage: 56,420

These meters haven't registered any usage in a while, which may mean that either the lot is unoccupied, the residents have moved out temporarily, or the meter chamber is stuck with sand or rust. For Cereniti equipped systems, this could also mean the radio is disconnected from the meter.

Total: 4 out of 61 (6.56%)

The status on the read is marked as not being "OK"; a status is returned for the Master Meter-brand and Metron brand systems only. If a meter is marked as "Leak", it means that water has been running through the meter continuously for at least 24 hours. The "Leak" status is reset 3 hours after a leak is fixed.

Total: 4 out of 61 (6.56%)

A resident is considered a high user if their 1-day usage is 250% higher than their per-day 30-day average and their 1-day usage is more than 100 gallons, or their 1-day usage is 300 gallons or more.

Total: 2 out of 61 (3.28%)
Total usage: 380 out of 2,230 (17.04%)

A meter is running backwards when the last read shows a higher reading than the current read.

Total: 2 out of 61 (3.28%)

If a transponder has not transmitted a reading for more than 3 days, then the read shows up here. It is recommeded that you check the transmitter to make sure it is not lying on the ground, broken, missing, or water-logged.

Total: 1 out of 61 (1.64%)

Inactive accounts shouldn't use any water, but these are registering a usage. You may want to check these.

Total: 1 out of 61 (1.64%)

Usage Report

Filter (ignore case, find anywhere): (search terms separated with "|" will find multiple things)

NOTE: The tooltip rendering is done using the truly amazing BoxOver, which can be found at http://boxover.swazz.org/