Daily Usage Report for Sunrise Green Lawn for 05/28/2026

Average Signal Strength: 786

Sometimes transponders will send out data without reading information. This sometimes happens for a few days with newly configured Hexagram transponders. If this condition persists for more than a few days, then they should be rewired or reconfigured.

Total: 47 out of 139 (33.81%)

These meters have a current read of zero. If these meters continue to read zero, the transponder may not be connected to the meter head properly (pulse meters), or the meter is not advancing.

Total: 1 out of 139 (0.72%)

These meters haven't registered any usage in a while, which may mean that either the lot is unoccupied, the residents have moved out temporarily, or the meter chamber is stuck with sand or rust. For Cereniti equipped systems, this could also mean the radio is disconnected from the meter.

Total: 14 out of 139 (10.07%)

A meter is running backwards when the last read shows a higher reading than the current read.

Total: 1 out of 139 (0.72%)

If a transponder has not transmitted a reading for more than 3 days, then the read shows up here. It is recommeded that you check the transmitter to make sure it is not lying on the ground, broken, missing, or water-logged.

Total: 91 out of 139 (65.47%)

Duplicate account identifiers will cause problems with bill processing. These need to be resolved as soon as possible.

Total: 6 out of 139 (4.32%)

Usage Report

NOTE: The tooltip rendering is done using the truly amazing BoxOver, which can be found at http://boxover.swazz.org/