Daily Usage Report for VI Housing Marley Additions for 07/12/2026

Average Signal Strength: 1,014

These meters are reporting water flow into the facility.

Total: 1 out of 61 (1.64%)
Total 1-day pumpage: 22,000
Total 30-day pumpage: 605,000

These meters haven't registered any usage in a while, which may mean that either the lot is unoccupied, the residents have moved out temporarily, or the meter chamber is stuck with sand or rust. For Cereniti equipped systems, this could also mean the radio is disconnected from the meter.

Total: 16 out of 61 (26.23%)

The status on the read is marked as not being "OK"; a status is returned for the Master Meter-brand and Metron brand systems only. If a meter is marked as "Leak", it means that water has been running through the meter continuously for at least 24 hours. The "Leak" status is reset 3 hours after a leak is fixed.

Total: 23 out of 61 (37.70%)

A resident is considered a high user if their 1-day usage is 250% higher than their per-day 30-day average and their 1-day usage is more than 100 gallons, or their 1-day usage is 300 gallons or more.

Total: 4 out of 61 (6.56%)
Total usage: 2,103 out of 2,953 (71.22%)

A meter is running backwards when the last read shows a higher reading than the current read.

Total: 1 out of 61 (1.64%)

The ideal voltage for an Aclara Star® MTU is 3.6 volts. Voltages that fall below 3.0 may contribute to intermittent transmissions. If these transmitters are giving intermittent reads, you may want to contact your authorized Aclara reseller.

Total: 13 out of 61 (21.31%)

If a transponder has not transmitted a reading for more than 3 days, then the read shows up here. It is recommeded that you check the transmitter to make sure it is not lying on the ground, broken, missing, or water-logged.

Total: 44 out of 61 (72.13%)

Usage Report

NOTE: The tooltip rendering is done using the truly amazing BoxOver, which can be found at http://boxover.swazz.org/